Defined terms
612 terms
| Verified | Term | Defined in | Definition |
|---|---|---|---|
| – | access goods only lift | Lift, Escalator and Passenger Conveyor Regulations 1 | “access goods only lift” means a lift in which persons are never transported or allowed by the user to be transported and where the conveyance is accessed by persons only for the purposes of loading and unloading at landings or for maintenance purposes, but does not include a temporarily installed material hoist; |
| – | acclimatised | Environmental Regulations for Workplaces 1 | “acclimatised” means physiologically adapted to a particular thermal environment and work rate; |
| – | accreditation authority | Electrical Installation Regulations 1 | “accreditation authority” means the South African National Accreditation System (SANAS) established by section 3 of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act No. 19 of 2006); |
| – | accreditation authority | Electrical Machinery Regulations 1 | “accreditation authority” means the South African National Accreditation System (SANAS) established by section 3 of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act No. 1 9 of 2006); |
| – | accreditation authority | Pressure Equipment Regulations 1 | “accreditation authority” means the South African National Accreditation System (SANAS) established by section 3 of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act No. 19 of 2006); |
| – | accredited authority | Lift, Escalator and Passenger Conveyor Regulations 1 | “accredited authority” means the South African National Accreditation System established by section 3 of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act No. 19 of 2006); |
| – | action level | Physical Agents Regulations 1 | "action level" means the level of a physical agent at which specified actions or counter measures must be taken; |
| – | adjoining | Facilities Regulations 1 | “adjoining” in relation to premises, means having a common boundary line; |
| – | adverse health effect | Ergonomics Regulations 1 | “adverse health effect” means the causation, promotion, facilitation or exacerbation of a structural or functional abnormality, with the implication that the abnormality produced has the potential of lowering the quality of life, contributing to a disabling illness or leading to premature death; |
| – | affected or interested party | Major Hazard Installation Regulations 1 | "affected or interested party" means a person, group of persons or organisations interested in or affected by an establishment and an organ of state that has jurisdiction over an establishment; |
| – | agent | Construction Regulations 1 | “agent” means a competent person who acts as a representative for a client; |
| – | air | Commercial Diving Regulations 1 | “air” means normal compressed air suitable for breathing while diving; Note The source text reads ““air™”; repaired to ““air””. |
| – | air monitoring | Hazardous Chemical Agents Regulations 1 | “air monitoring” means the monitoring of the concentrations of airborne hazardous chemical agents; |
| – | air temperature | Physical Agents Regulations 1 | “air temperature" means the temperature of air as determined by a standard thermometer, with units expressed in degrees Celsius (°C); |
| – | air velocity | Physical Agents Regulations 1 | “air velocity" means the rate of motion of air in a given direction, measured as distance per unit time; |
| – | airline diving | Commercial Diving Regulations 1 | “airline diving" means diving with the use of diving plant and machinery comprising an air supply, airline, diver safety harness, demand regulator or full face mask; |
| – | ammonium nitrate | Explosives Regulations 1 | ‘‘ammonium nitrate” as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport and classified by the inspector of explosives; |
| – | angle of repose | Construction Regulations 1 | “angle of repose” means the steepest angle of a surface at which a mass of loose or fragmented material will remain stationary in a pile on the surface, rather than sliding or crumbling away; |
| – | appliance | Pressure Equipment Regulations 1 | “appliance” means an appliance as defined in SANS 1539; |
| – | approved inspection authority | OHS Act 1(1) | “approved inspection authority” means an inspection authority approved by the chief inspector: Provided that an inspection authority approved by the chief inspector with respect to any particular service shall be an approved inspection authority with respect to that service only; |
| – | approved lead inspection authority | Lead Regulations 1 | “approved lead inspection authority” means an approved inspection authority for the— (a) monitoring of lead concentrations in the air; or (b) analysis of blood lead or urinary lead concentrations; |
| – | approved noise inspection authority | Noise Exposure Regulations 1 | "approved noise inspection authority" means an inspection authority approved by the Chief Inspector of the Department of Employment and Labour for the monitoring of noise in the workplace; |
| – | approved plan of work | Asbestos Abatement Regulations 1 | “approved plan of work” means a written site-specific methodology as contemplated in regulation 15 that is at least co-signed by the asbestos client, registered asbestos contractor and approved inspection authority; |
| – | artificial light | Physical Agents Regulations 1 | “artificial light" means any light generated by artificial light sources; |
| – | artificial ventilation | Physical Agents Regulations 1 | “artificial ventilation" means the system in which air is caused to circulate through a room by means of a mechanical apparatus which forces or extracts filtered air from such a room; |
| – | asbestos | Asbestos Abatement Regulations 1 | “asbestos” means the following fibrous silicates: (a) Asbestos actinolite, CAS No. 77536-66-4; (b) asbestos grunerite (amosite), CAS No. 12172-73-5; (c) asbestos anthophyllite, CAS No. 77536-67- 5; (d) chrysotile, CAS No. 12001-29-5 or CAS No. 132207-32-0; (e) crocidolite, CAS No. 12001-28-4; (f) asbestos tremolite, CAS No. 77536-68-6; and (g) any mixture containing these fibrous silicates; |
| – | asbestos abatement regulations | Hazardous Chemical Agents Regulations 1 | “asbestos abatement regulations” means the Asbestos Abatement Regulations, 2020, published as Government Notice No. R.11196 of 10 November 2020 under section 43(1) of the Act; |
| – | asbestos cement products | Asbestos Abatement Regulations 1 | “asbestos cement products” means a range of building materials that were manufactured using moulding and compression techniques, consisting of a hardened mixture of asbestos fibres, cement and water; |
| – | asbestos clearance certificate | Asbestos Abatement Regulations 1 | “asbestos clearance certificate” means a written document verifying that the regulated asbestos fibre concentration in the air meets the clearance indicator; |
| – | asbestos client | Asbestos Abatement Regulations 1 | “asbestos client” means any person for whom asbestos work is performed; |
| – | asbestos coating | Asbestos Abatement Regulations 1 | “asbestos coating” means a surface coating which contains asbestos for fire protection, heat insulation or sound insulation, but does not include textured decorative coatings; |
| – | asbestos disposal site | Asbestos Abatement Regulations 1 | “asbestos disposal site” means a site specifically designated for the purpose of asbestos disposal in terms of the National Environmental Management: Waste Act, 2008 (Act No. 59 of 2008); |
| – | asbestos dust | Asbestos Abatement Regulations 1 | “asbestos dust” means airborne or settled dust, which contains or is likely to contain regulated asbestos fibres; |
| – | asbestos in place | Asbestos Abatement Regulations 1 | “asbestos in place” includes any asbestos, asbestos cement products, asbestos coatings, asbestos-containing material, asbestos dust, asbestos insulation, asbestos insulation board and asbestos waste at the workplace; |
| – | asbestos insulating board | Asbestos Abatement Regulations 1 | “asbestos insulating board” means any flat sheet, tile or building board consisting of a mixture of asbestos and cement or any other material, but which is not— (a) asbestos coating; or (b) an article of bitumen, plastic, resin or rubber, which contains asbestos and which thermal and acoustic properties are incidental to its main purpose; |
| – | asbestos insulation | Asbestos Abatement Regulations 1 | “asbestos insulation” means any asbestos-containing material, which is used for thermal, acoustic or other insulation purposes, including fire protection, except— (a) asbestos cement, asbestos coating or asbestos insulating board; or (b) any article of bitumen, plastic, resin or rubber, which contains asbestos and which thermal and acoustic properties are incidental to its main purpose; |
| – | asbestos removal site | Asbestos Abatement Regulations 1 | “asbestos removal site” means a workplace where asbestos removal work is performed; |
| – | asbestos removal supervisor | Asbestos Abatement Regulations 1 | “asbestos removal supervisor” means a competent person responsible for supervision of physical asbestos work processes and coordination of asbestos removal on an asbestos removal site; |
| – | asbestos risk assessment | Asbestos Abatement Regulations 1 | “asbestos risk assessment” means a risk assessment and risk categorisation of potential exposure to asbestos dust; |
| – | asbestos waste | Asbestos Abatement Regulations 1 | “asbestos waste” means an undesirable or superfluous asbestos or asbestos-containing product or by-product or the undesirable or superfluous asbestos or asbestos-containing emission or residue of any process or activity, which has been— (a) discarded by any person; or (b) accumulated and stored temporarily with the purpose of discarding it, with or without prior treatment connected with the discarding thereof; |
| – | asbestos work | Asbestos Abatement Regulations 1 | “asbestos work” means work that exposes or is likely to expose an employee to asbestos dust, including transporting, storing, removing, handling, treating, repairing and disposing of asbestos; |
| – | asbestos-containing material | Asbestos Abatement Regulations 1 | “asbestos-containing material” means asbestos as well as any material that contains asbestos and includes asbestos cement products, asbestos coating, asbestos insulation board, asbestos insulation, asbestos textured decorative coatings, asbestos contaminated soil and other asbestos-containing materials; |
| – | ASME | Pressure Equipment Regulations 1 | “ASME” means the American Society of Mechanical Engineers; |
| – | assessment | Hazardous Chemical Agents Regulations 1 | “assessment” means a programme to determine any risk from exposure to an HCA associated with the workplace in order to identify the steps needed to be taken to remove, reduce or control such HCA; |
| – | attenuation | Environmental Regulations for Workplaces 1 | “attenuation” means the proven capability of hearing protectors to reduce the equivalent noise level to which the wearer thereof is exposed; |
| – | authorised person | Pressure Equipment Regulations 1 | “authorised person” means a person who is registered as competent within the scope of work for which an organisation approved by the chief inspector has registered that person; |
| – | authorized explosive | Explosives Regulations 1 | “authorized explosive” means any substance or mixture that has the properties of an explosive and is approved by the Minister for Safety and Security and published by notice in the Government Gazette as an explosive; |
| – | bargaining council | General Administrative Regulations 1 | “bargaining council” means the bargaining council established by section 27 of the Labour Relations Act; |
| – | bei | Hazardous Chemical Agents Regulations 1 | “bei” or ‘biological exposure index’ is a value for assessing biological monitoring results, intended as a reference guideline for the likelihood of adverse health effects, and generally represents the level of determinants that are most likely to be observed in specimens collected from healthy employees who have been exposed to HCAs with inhalation exposure at the occupational exposure limit, as listed in Table 4 of Annexure 2 hereby, as revised from time to time and published in the Gazette; |
| – | bench saw | Driven Machinery Regulations 1 | “bench saw” means a circular saw working in a bench (including a rack-bench) for the purpose of ripping, deep cutting or cross cutting, but does not include a swing-saw or other saw that is moved towards the wood; |
| – | benign conditions | Commercial Diving Regulations 1 | “benign conditions” means a tank or pool artificially constructed for the purpose of swimming or diving or for use as an aquarium or for aquaculture, where— (a) the diver is in full view from the surface or viewing windows at all times; (b) there is no significant risk of entanglement or entrapment; and (c) the water depth does not exceed 8 m; |
| – | biohazard | Hazardous Biological Agents Regulations 1 | “biohazard” means any potential laboratory source of harm caused by biological agents, microbial by-products or metabolites; |
| – | biological agent | Hazardous Biological Agents Regulations 1 | “biological agent” means any microorganism, microbial by-products or metabolites, cell or organic material with plant, animal or human origin, including any which have been genetically modified; |
| – | biological monitoring | OHS Act 1(1) | “biological monitoring” means a planned programme of periodic collection and analysis of body fluid, tissues, excreta or exhaled air in order to detect and quantify the exposure to or absorption of any substance or organism by persons. |
| – | block and tackle | Driven Machinery Regulations 1 | “block and tackle” means a lifting device consisting of one or more pulley blocks reeved with fibre ropes, used solely for the raising and lowering of a load or for moving it horizontally, but does not include chain blocks, lever hoists or steel-wire rope pullers; |
| – | Boatswain’s chair | General Safety Regulations 1 | “Boatswain’s chair” means a suspended platform seat intended for supporting one person in an elevated position; Defination of “boatswain’s chair” added by GNR.1971 OF 1998 |
| – | building | OHS Act 1(1) | “building” includes— (a) any structure attached to the soil; (b) any building or such structure or part thereof which is in the process of being erected; or (c) any prefabricated building or structure not attached to the soil; |
| – | building work | General Safety Regulations 1 | “building work” means building work as defined in the General Administrative Regulations published under Government Notice R.2206 of 5 October 1984; |
| – | building work | General Machinery Regulations 1 | “building work” means building work as defined in the General Administrative Regulations, published under Government Notice R.2206 of 5 October 1984; |
| – | building work | Environmental Regulations for Workplaces 1 | “building work” means the work defined as such in regulation 1 of the General Administrative Regulations promulgated in terms of section 35 of the Act and published under Government Notice R.2206 of 5 October 1984; |
| – | bulk mixing plant | Construction Regulations 1 | “bulk mixing plant” means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work; |
| – | burning grounds | Explosives Regulations 1 | “burning grounds” means a fenced-in area with a controlled entrance where explosives may be exposed to a naked flame under safe controlled conditions; |
| – | calender rolls | Driven Machinery Regulations 1 | “calender rolls” means a series of counter-rotating rollers at the end of a rolling process; Note Guidance notes printed in the source text after this clause: (a) These rolls are used in steel paper mills, printing industry as well as food industry. |
| – | capstan-type hoist | Driven Machinery Regulations 1 | “capstan-type hoist” means a rotating machine used to control or to apply force to move or raise loads by traction on a rope or cable; Note Guidance notes printed in the source text after this clause: (a) This machine is used generally in fishing industry, harbours as well as pull rolling stock(railway vehicles). |
| – | carcinogen | Hazardous Chemical Agents Regulations 1 | “carcinogen” or ‘CARC’ means any chemical agent or mixture which induces cancer or increases its incidence, classified by the GHS as (a) Category 1: known or presumed human carcinogens; or (b) Category 2: suspected human carcinogens; |
| – | cas no. | Asbestos Abatement Regulations 1 | “cas no.” means the Chemical Abstracts Service Registry Number; |
| – | cas number | Hazardous Chemical Agents Regulations 1 | “cas number” or ‘chemical identity’ means the number or name, respectively, that uniquely identifies a chemical, given in accordance with the nomenclature systems of the International Union of Pure and Applied Chemistry or the Chemical Abstracts Service, or a technical name; |
| – | CCMA | General Administrative Regulations 1 | “CCMA” means the Commission for Conciliation, Mediation and Arbitration established by section 112 of the Labour Relations Act; |
| – | certificate | Pressure Equipment Regulations 1 | “certificate” means a written declaration of conformance to these Regulations; |
| – | certificate of competency | Certificate of Competency Regulations 1 | “certificate of competency” or “certificate” means a certificate of competency as a mechanical or an electrical engineer, as the case may be, issued in terms of regulation 2 (1); |
| – | certificate of compliance | Electrical Installation Regulations 1 | “certificate of compliance” means— (a) a certificate with a unique number obtainable from the chief inspector, or a person appointed by the chief inspector, in the form of Annexure 1 and issued by a registered person in respect of an electrical installation or part of an electrical installation; or (b) a certificate of compliance issued under the Electrical Installation Regulations, 1992; |
| – | certificated engineer | General Machinery Regulations 1 | “certificated engineer” means any person to whom a certificate of competency referred to in regulation E1 (1) of the Regulations, published under Government Notice R.929 of 28 June 1963, has been granted and includes any person who is the holder of a certificate of competency in mechanical or electrotechnical engineering issued before 1 January 1966 under the Mines and Works Act, 1956 (Act 27 of 1956); |
| – | certificated person | Explosives Regulations 1 | “certificated person” means any competent person to whom a certificate of competency has been granted by an approved inspection authority, accredited by the National Explosives Council or any other organization acceptable to and approved by the chief inspector of occupational health and safety: |
| – | change | Major Hazard Installation Regulations 1 | "change"means— (a) a modification in the methods, equipment or procedures in use or the handling or processing of dangerous substances in the establishment that may increase the establishment's risk profile; (b) an increase or decrease in the quantity of dangerous substances contemplated in Chapters 1 and 2 that results in the establishment being classified as a major hazard installation where— (i) a low hazard establishment becomes a medium hazard establishment or vice versa; (ii) a medium hazard establishment becomes a high hazard establishment or vice versa; (iii) a low hazard establishment becomes a high hazard establishment or vice versa; or (iv) an installation below the low hazard establishment threshold becomes a low, medium or high hazard establishment; (c) when an emergency plan is brought into action for a major incident; |
| – | chemical agent | Hazardous Chemical Agents Regulations 1 | “chemical agent” means a GHS-aligned chemical agent or mixture; |
| – | chief director: provincial operations | Hazardous Chemical Agents Regulations 1 | “chief director: provincial operations” means the provincial director as defined in regulation 1 of the General Administrative Regulations; |
| – | chief director: provincial operations | Asbestos Abatement Regulations 1 | “chief director: provincial operations” means the provincial director as defined in regulation 1 of the General Administrative Regulations, 2003, published as Government Notice R.929 in Gazette No. 25129 of 25 June 2003; |
| – | chief director: provincial operations | Ergonomics Regulations 1 | “chief director: provincial operations” means the provincial director as defined in regulation 1 of the General Administrative Regulations, 2003, as published in Government Notice No. R. 929 of 25 June 2003; |
| – | Chief Director: Provincial Operations | Commercial Diving Regulations 1 | “Chief Director: Provincial Operations" means the provincial director as defined in regulation 1 of the General Administrative Regulations, 2003, published as Government Notice R. 929 in Government Gazette No. 25129 of 25 June 2003; |
| – | Chief Director: Provincial Operations | Noise Exposure Regulations 1 | "Chief Director: Provincial Operations" means the provincial director as defined in the General Administrative Regulations, 2003, published as Government Notice R.929 in Gazette No. 25129 of 25 June 2003; |
| – | Chief Director: Provincial Operations | Physical Agents Regulations 1 | "Chief Director: Provincial Operations" means the provincial director as defined in the General Administrative Regulations, 2003, published as Government Notice No. R. 929 in Gazette No. 25129 of 25 June 2003; |
| – | chief executive officer | OHS Act 1(1) | “chief executive officer”, in relation to a body corporate or an enterprise conducted by the State, means the person who is responsible for the overall management and control of the business of such body corporate or enterprise; |
| – | chief Inspector | OHS Act 1(1) | “chief Inspector” means the officer designated under section 27 as chief inspector, and includes any officer acting as chief inspector; |
| – | chief inspector of explosives | Explosives Regulations 1 | “chief inspector of explosives” means the chief inspector of explosives appointed by the Minister for Safety and Security; Annexure 1 Explosives Regulations |
| – | circuit | Electrical Machinery Regulations 1 | “circuit” means an arrangement of conductors for the purpose of carrying electrical energy; |
| – | class 1.1 | Explosives Regulations 1 | “class 1.1” means a class of explosives as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport ; |
| – | class 1.3 | Explosives Regulations 1 | ‘‘class 1.3” means a class of explosives as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport: |
| – | class 1.4 | Explosives Regulations 1 | “class 1.4” means a class of explosives as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport; |
| – | class I commercial diver | Commercial Diving Regulations 1 | “class I commercial diver" means a registered saturation commercial diver who is competent in all aspects of saturation and bell diving; Note The source text reads “class |”; repaired to “class I”. |
| – | class II commercial diver | Commercial Diving Regulations 1 | “class II commercial diver" means a registered commercial diver who is competent in all aspects of air diving using surface supplied diving plant and machinery with an open bell or diving stage, to a maximum depth of 50 m; and Note The source text reads “class Il”; repaired to “class II”. |
| – | class II commercial diver (m) | Commercial Diving Regulations 1 | “class II commercial diver (m)" means a registered commercial diver who is competent in all aspects of mixed gas diving using surface supplied diving plant and machinery, with an open bell or diving stage, excluding saturation diving, to a maximum depth of 75 m; Note The source text reads “class tl”; repaired to “class II”. |
| – | class III commercial diver | Commercial Diving Regulations 1 | “class III commercial diver" means a registered commercial diver who is competent in all aspects of air diving using surface supplied diving plant and machinery, to a maximum depth 30 m; Note The source text reads “class Ill”; repaired to “class III”. |
| – | class IV commercial diver | Commercial Diving Regulations 1 | “class IV commercial diver" means a registered commercial diver who is competent in all aspects of air diving using scuba, to a maximum depth of 30 m; |
| – | class V commercial diver | Commercial Diving Regulations 1 | “class V commercial diver" means a registered commercial scientific diver who is competent in air scuba diving and may dive under the code of practice for scientific diving, to a depth not exceeding 20 m; |
| – | class VI commercial diver | Commercial Diving Regulations 1 | “class VI commercial diver" means a registered commercial diver who is competent in air scuba diving and may dive under the code of practice for diving in benign conditions, to a depth not exceeding 8 m; |
| – | class. 1.2 | Explosives Regulations 1 | “class. 1.2” means a class of explosives as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport: |
| – | class1.5 | Explosives Regulations 1 | “class1.5” means a class of explosives as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport; |
| – | class1.6 | Explosives Regulations 1 | “class1.6” means a class of explosives as defined in the South African Code of Practice SABS 0228, The Identification and Classification of Dangerous Goods for Transport; |
| – | clearance indicator | Asbestos Abatement Regulations 1 | “clearance indicator” means the measured airborne concentration of regulated asbestos fibres is less than 0,01 fibres per millilitre (f/ ml), as measured in accordance with HSG 248 or an equivalent method; |
| – | client | Construction Regulations 1 | “client” means any person for whom construction work is being performed; |
| – | client | Commercial Diving Regulations 1 | "client" means a person or organisation for whom a diving project is performed: |
| – | clothing adjustment value | Physical Agents Regulations 1 | “clothing adjustment value" means the single number that is added to the wet-bulb globe temperature to represent the effects of clothing worn during an activity; |
| – | code of practice | Commercial Diving Regulations 1 | “code of practice" means a document of best practice incorporated under these regulations; |
| – | cold stress | Physical Agents Regulations 1 | "cold stress" means a condition that occurs when the body can no longer maintain its normal core temperature; |
| – | commercial diver | Commercial Diving Regulations 1 | “commercial diver" means a person registered as a diver in any of the classes listed in these regulations or who has an international qualification recognised by the chief inspector; |
| – | commercial diving operation | Commercial Diving Regulations 1 | “commercial diving operation" begins when the first diver who takes part in the operation starts to prepare to dive under the instruction of the supervisor and ends when the last diver who took part in the operation leaves the water, any other liquid or pressurised environment in which the dive took place and has completed any necessary decompression procedures; |
| – | Commission of Examiners | Certificate of Competency Regulations 1 | “Commission of Examiners” or “Commission” means the commission established in terms of regulation 5 (1); |
| – | Compensation Commissioner | General Administrative Regulations 1 | “Compensation Commissioner” means the Compensation Commissioner appointed under section 2 of the Compensation for Occupational Injuries and Diseases Act, 1993; |
| – | Compensation for Occupational Injuries and Diseases Act | General Administrative Regulations 1 | “Compensation for Occupational Injuries and Diseases Act” means the Compensation for Occupational Injuries and Diseases Act, 1993 (Act No. 130 of 1993); |
| – | compensation fund | Commercial Diving Regulations 1 | “compensation fund" means the compensation fund as defined in the Compensation for Occupational Injuries and Diseases Act, 1993 (Act No. 130 of 1993); |
| – | competent lift mechanic | Lift, Escalator and Passenger Conveyor Regulations 1 | “competent lift mechanic” means a person who— (a) has completed a learnership or an apprenticeship in the trade of lift mechanic; (b) has completed an electrical or mechanical trade qualification and has had at least one year post qualification general practical experience on lifts; or (c) has obtained a minimum of a NQF level five electrical or mechanical engineering qualification and has had at least one year post qualification general practical experience on lifts; |
| – | competent lift service provider | Lift, Escalator and Passenger Conveyor Regulations 1 | “competent lift service provider” means a person that employs competent lift mechanics and a competent operator, or a competent lift mechanic who is self-employed and who undertakes to contract with the user of a lift, escalator, passenger conveyor to perform maintenance, examinations and tests in terms of regulation 7; |
| – | competent operator | Lift, Escalator and Passenger Conveyor Regulations 1 | “competent operator” means a person who has obtained a minimum of a NQF level 2 in the maintenance or installation of lift, escalators and passenger conveyor; |
| – | competent person | General Machinery Regulations 1 | “competent person” in relation to machinery, means any person who— (a) has served an apprenticeship in an engineering trade which included the operation and maintenance of machinery, or has had at least five years’ practical experience in the operation and maintenance of machinery, and who during or subsequent to such apprenticeship or period of practical experience, as the case may be, has had not less than one year’s experience in the operation and maintenance appropriate to the class of machinery he is required to supervise; (b) has obtained an engineering diploma in either the mechanical or electrotechnical (heavy current) fields with an academic qualification of at least T3 or N5, or of an equivalent level, and who subsequent to achieving such qualification has had not less than two years’ practical experience in the operation and maintenance appropriate to the class of machinery he is required to supervise; (c) is a graduate engineer and has had not less than two years’ post-graduate practical experience in the operation and maintenance appropriate to the class of machinery he is required to supervise and who has passed the examination on the Act and the regulations made thereunder, held by the Commission of Examiners in terms of regulations E5 (2) of the regulations published under Government Notice R.929 of 28 June 1963; or (d) is a certificated engineer; Note The source text reads “operationvand”; repaired to “operation and”. |
| – | competent person | Driven Machinery Regulations 1 | “competent person” means a person who has the knowledge, training, experience and qualifications specific to the work performed: provided that where appropriate qualifications and training are registered in terms of the provisions of the South African Qualifications Authority Act, 1995, those qualifications and that training shall be deemed to be the required qualifications and training; |
| – | competent person | Construction Regulations 1 | “competent person” means a person who— (a) has in respect of the work or task to be performed the required knowledge, training and experience and, where applicable, qualifications, specific to that work or task: Provided that where appropriate qualifications and training are registered in terms of the provisions of the National Qualification Framework Act, 2008 (Act No.67 of 2008), those qualifications and that training must be regarded as the required qualifications and training; and (b) is familiar with the Act and with the applicable regulations made under the Act; |
| – | competent person | Explosives Regulations 1 | “competent person” means a person with sufficient training and experience in, and knowledge of, the health and safety aspects of explosives deemed appropriate by the National Explosive Council or any other organization approved by the chief inspector of occupational health and safety; |
| – | competent person | Hazardous Biological Agents Regulations 1 | “competent person” means a person who has, in respect of the work or task to be performed, the required knowledge, training, experience and, where applicable, qualifications specific to HBAs; |
| – | competent person | Asbestos Abatement Regulations 1 | “competent person” means a person who— (a) has, in respect of the work or task to be performed, the required knowledge, training and experience and, where applicable, qualifications specific to asbestos work or related tasks: Provided that, where appropriate qualifications and training are registered in terms of the National Qualifications Framework Act, 2008 (Act No. 67 of 2008), those qualifications and that training must be regarded as the required qualifications and training; and (b) is familiar with the Act and the applicable regulations made under the Act; |
| – | competent person | Ergonomics Regulations 1 | “competent person” in relation to ergonomics, means a person who— (a) has in respect of the work or task to be performed the required knowledge, training and experience in ergonomics and, where applicable, qualifications specific to ergonomics: Provided that where appropriate qualifications and training are registered in terms of the provisions of the National Qualifications Framework Act, 2008 (Act No. 67 of 2008), those qualifications and that training must be regarded as the required qualifications and training; and (b) is familiar with the Act and the applicable regulations made under the Act; |
| – | competent person | Commercial Diving Regulations 1 | “competent person” means a person who has in respect of the work or task to be performed the required knowledge, training and experience and, where applicable, qualifications specific to commercial diving operations and is familiar with the Act and the applicable regulations made under the Act; |
| – | competent person | Noise Exposure Regulations 1 | "competent person" in relation to noise means a person who— (a) has, in respect of the work or task to be performed, the required knowledge, training and experience in noise and, where applicable, relevant qualifications specific to or including noise: Provided that where appropriate qualifications and training are registered in terms of the provisions of the National Qualifications Framework Act, 2008 (Act No. 67 of 2008), those qualifications and that training must be regarded as the required qualifications and training; and (b) is familiar with the Act and the applicable regulations made under the Act; |
| – | competent person | Physical Agents Regulations 1 | "competent person" means— (a) (i) in terms of the exposure risk assessment, a person who has, in respect of the work or task to be performed, the required knowledge, training and experience in the physical agent and, where applicable, relevant qualifications specific to or including the physical agent: Provided that where appropriate qualifications and training are registered in terms of the provisions of the National Qualifications Framework Act, 2008 (Act No. 67 of 2008), those qualifications and that training must be regarded as the required qualifications and training; or (ii) in terms of the exposure monitoring or inspections and tests of control measures, a person who has, in respect of the work or task to be performed, the required knowledge, training and experience in the identified physical agent and the relevant qualifications specific to or including the identified physical agent: Provided that where appropriate qualifications and training are registered in terms of the provisions of the National Qualifications Framework Act, 2008, those qualifications and that training must be regarded as the required qualifications and training; and (b) a person who is familiar with the Act and the applicable regulations made under the Act; |
| – | competent person: audiometric testing | Noise Exposure Regulations 1 | "competent person: audiometric testing" means— (a) for screening audiometry; (i) a person registered in terms of the Health Professions Act, 1974 (Act No. 56 of 1974), with the Health Professions Council of South Africa in any of the following categories: (aa) ENT (ear, nose and throat specialist); (bb) speech therapist; or (cc) audiologist; (ii) a person with a valid occupational skills certificate: Occupational Audiometric Screener, obtained from an organisation accredited with the Quality Assurance Body that has been delegated the quality assurance responsibilities for Occupational Audiometric Screener unit standards by the Quality Council for Trades and Occupations (QCTO), established in terms of section 26(1) of the Skills Development Amendment Act, Act No. 37 of 2008, as amended, and registered with an organisation recognised by the Chief Inspector; and (b) for diagnostic audiology— (i) a person registered in terms of the Health Professions Act, 1974 (Act No. 56 of 1974), with the Health Professions Council of South Africa in any of the following categories: (aa) ENT (ear, nose and throat specialist); or (bb) audiologist; |
| – | complex | Explosives Regulations 1 | “complex” means a group of danger buildings in the same danger area; |
| – | comprehensive report | Lift, Escalator and Passenger Conveyor Regulations 1 | “comprehensive report” means a certificate as contemplated in the relevant health and safety standard incorporated into these Regulations; |
| – | conductor | Electrical Machinery Regulations 1 | “conductor” means an electrical conductor so arranged as to be electrically connected to a source of electrical energy; |
| – | confined space | General Safety Regulations 1 | “confined space” means an enclosed, restricted, or limited space in which, because of its construction, location or contents, or any work activity carried on therein, a hazardous substance may accumulate or an oxygen-deficient atmosphere may occur, and includes any chamber, tunnel, pipe, pit, sewer, container, valve, pump, sump, or similar construction, equipment, machinery or object in which a dangerous liquid or dangerous concentration of gas, vapour, dust or fumes may be present; |
| – | confined space | Electrical Machinery Regulations 1 | “confined space” means an enclosed, restricted or limited space in which, because of its construction, location or contents, or any work activity carried on therein, a hazardous substance may accumulate or an oxygen deficient atmosphere may occur, and includes any chamber, tunnel, pipe, pit, sewer, container, valve, pump, sump or similar construction, equipment, machinery or object in which a dangerous liquid or a dangerous concentration of gas, vapour, dust or fumes may be present; |
| – | construction | Pressure Equipment Regulations 1 | “construction” includes materials, design, fabrication, modification, repair, installation, examination, inspection, testing and certification; |
| – | construction manager | Construction Regulations 1 | “construction manager” means a competent person responsible for the management of the physical construction processes and the co-ordination, administration and management of resources on a construction site; |
| – | construction site | Construction Regulations 1 | “construction site” means a work place where construction work is being performed; |
| – | construction supervisor | Construction Regulations 1 | “construction supervisor” means a competent person responsible for supervising construction activities on a construction site; |
| – | construction vehicle | Construction Regulations 1 | “construction vehicle” means a vehicle used as a means of conveyance for transporting persons or material, or persons and material, on and off the construction site for the purposes of performing construction work; |
| – | construction work | Construction Regulations 1 | “construction work” means any work in connection with— (a) the construction, erection, alteration, renovation, repair, demolition or dismantling of or addition to a building or any similar structure; or (b) the construction, erection, maintenance, demolition or dismantling of any bridge, dam, canal, road, railway, runway, sewer or water reticulation system; or the moving of earth, clearing of land, the making of excavation, piling, or any similar civil engineering structure or type of work; |
| – | construction work permit | Construction Regulations 1 | “construction work permit” means a document issued in terms of regulation 3; |
| – | consumer product | Hazardous Chemical Agents Regulations 1 | “consumer product” means a product containing an HCA, which— (a) is packed or repacked primarily for use by a household consumer or for use in an office; (b) if the product is packed or repacked primarily for use by a household consumer, is packed in the way and quantity in which it is intended to be used by a household consumer; and (c) if the product is packed or repacked primarily for use in an office, is packed in the way and quantity in which it is intended to be used for office work; |
| – | container | Hazardous Chemical Agents Regulations 1 | “container”, in relation to an HCA, means anything in or by which an HCA is, or has been, wholly or partly covered, enclosed or packed, including anything necessary for the container to perform its function as a container; |
| – | contractor | Construction Regulations 1 | “contractor” means an employer who performs construction work; |
| – | control measures | Hazardous Biological Agents Regulations 1 | “control measures” means measures that remove, prevent or reduce the exposure of persons to HBAs at the workplace; |
| – | Council | OHS Act 1(1) | “Council” means the Advisory Council for Occupational Health and Safety established by section 2; |
| – | cut-off value | Hazardous Chemical Agents Regulations 1 | “cut-off value” or ‘GHS cut-off value’ or |
| – | danger | OHS Act 1(1) | “danger” means anything which may cause injury or damage to persons or property; |
| – | danger area | Explosives Regulations 1 | “danger area” means an area surrounded by a fence provided with a guarded entrance in which are situated explosives testing, manufacturing and storage buildings, and as much of the land surrounding them as is shown on the official explosives workplace site plan; |
| – | danger building or room | Explosives Regulations 1 | “danger building or room” means any licensed building or room used as an explosives workplace or explosives magazine; |
| – | danger zone | Explosives Regulations 1 | “danger zone” means the region inside the area encompassed by the larger safety distance applicable to a danger building in terms of the safety distances stipulated in Annexure 1 ; |
| – | dangerous substance | Pressure Equipment Regulations 1 | “dangerous substance” means a substance defined and classified as such in terms of SANS 10228; |
| – | dangerous substances | Major Hazard Installation Regulations 1 | "dangerous substances" means substances or mixtures used or present at the workplace that could, if not properly controlled, cause harm to people, the environment and property as a result of loss of containment, fire or explosion; |
| – | dB (A) | Environmental Regulations for Workplaces 1 | “dB (A)” means a unit of measurement of sound pressure level as contemplated in SABS 083; |
| – | dead | Electrical Machinery Regulations 1 | “dead” means at or about zero potential and isolated from any live system; |
| – | decontamination | Hazardous Biological Agents Regulations 1 | “decontamination” means the procedure that eliminates or reduces biological agents to a level that does not cause harm with respect to the transmission of infection or other adverse effects; |
| – | demolition work | Construction Regulations 1 | “demolition work” means a method to dismantle, wreck, break, pull down or knock down of a structure or part thereof by way of manual labour, machinery, or the use of explosives; |
| – | demolition work | Asbestos Abatement Regulations 1 | “demolition work” means a method to dismantle, wreck, break, pull down or knock down a structure or part thereof by way of manual labour, machinery or the use of explosives; |
| – | Department | OHS Act 1(1) | “Department” means the Department of Manpower; |
| – | Department of Education and Culture | Certificate of Competency Regulations 1 | “Department of Education and Culture” means the Department of Education and Culture, Administration: House of Assembly. |
| – | design | Construction Regulations 1 | “design” in relation to any structure, includes drawings, calculations, design details and specifications; |
| – | design | Ergonomics Regulations 1 | “design” in relation to objects, systems or measurable human interaction includes drawings, calculations, design details and specification; |
| – | design pressure | Pressure Equipment Regulations 1 | “design pressure” means the gauge pressure used in the design formulae to determine the dimensions of the component parts of the pressure equipment; |
| – | design temperature | Pressure Equipment Regulations 1 | “design temperature” means the temperature used in the design formulae to determine the dimensions of the component parts of the pressure equipment; |
| – | design verification | Pressure Equipment Regulations 1 | “design verification” means verification that the pressure equipment complies with the applied design of the relevant health and safety standard and the requirements of these Regulations; |
| – | designated medical practitioner | Commercial Diving Regulations 1 | “designated medical practitioner" means an occupational medicine practitioner registered with the Health Professions Council of South Africa (HPCSA), who has completed a course in underwater medicine through an organisation recognised by the chief inspector; |
| – | designer | Construction Regulations 1 | “designer” means— (a) a competent person who— (i) prepares a design; (ii) checks and approves a design; (iii) arranges for a person at work under his or her control to prepare a design, including an employee of that person where he or she is the employer; or (iv) designs temporary work, including its components; (b) an architect or engineer contributing to, or having overall responsibility for a design; (c) a building services engineer designing details for fixed plant; (d) a surveyor specifying articles or drawing up specifications; (e) a contractor carrying out design work as part of a design and building project; or (f) an interior designer, shop-fitter or landscape architect; |
| – | designer | Ergonomics Regulations 1 | “designer” means any person who— (a) prepares a design; (b) checks and approves a design; (c) arranges for a person at work under his or her supervision to prepare a design, including an employee of that person where he or she is the employer; (d) designs temporary work, including its components; or (e) contributes to or has overall responsibility for machinery, plant or work systems design; |
| – | direction | Major Hazard Installation Regulations 1 | "direction" means a notice, or a recommendation an instruction served by an inspector in writing; |
| – | directional luminaire | Environmental Regulations for Workplaces 1 | “directional luminaire” means a luminaire from which the light radiation is confined to a well-defined narrow beam; |
| – | disinfect | Hazardous Biological Agents Regulations 1 | “disinfect” means to render non-viable virtually all recognised pathogenic microorganisms, but not necessarily all microbial forms; |
| – | dive | Commercial Diving Regulations 1 | "dive" means entering water or any other liquid, or a pressurised environment in which a person is subjected to pressure greater than 100 millibars above atmospheric pressure, where, in order to survive in such an environment, a person breathes air or other gas at pressure greater than atmospheric pressure; |
| – | diving apparatus | Commercial Diving Regulations 1 | “diving apparatus” means plant and machinery that can enable a person to breathe while diving; |
| – | diving operations record | Commercial Diving Regulations 1 | “diving operations record" means the record containing the required particulars for each diving operation set out in Annexure B; |
| – | diving project | Commercial Diving Regulations 1 | “diving project" means any activity made up of one or more commercial diving operations; |
| – | diving supervisor | Commercial Diving Regulations 1 | “diving supervisor" means a person registered as a diving supervisor in any of the classes listed in these regulations, who has adequate practical and theoretical knowledge and experience of the diving techniques to be used; |
| – | diving system | Commercial Diving Regulations 1 | “diving system" means all plant and machinery required to be readily available in support of a commercial diving operation; |
| – | Diving Technical Committee | Commercial Diving Regulations 1 | “Diving Technical Committee" means a Committee established in terms of regulation 24; |
| – | divisional inspector | General Machinery Regulations 1 | “divisional inspector” means the divisional inspector referred to in regulation 1 of the General Administrative Regulations, published under Government Notice R.2206 of 5 October 1984; |
| – | drinking water | Facilities Regulations 1 | “drinking water” means water that complies with SABS 241; |
| – | duty holder | Major Hazard Installation Regulations 1 | "duty holder" means an employer, a self-employed person, a user or a pipeline operator who is in control of an establishment; |
| – | earthed | Electrical Machinery Regulations 1 | “earthed” means connected to the general mass of earth in such a manner as will ensure at all times an immediate safe discharge of electrical energy; |
| – | electric fence | Electrical Machinery Regulations 1 | “electric fence” means an electrified barrier consisting of one or more bare conductors erected against the trespass of persons or animals; |
| – | electric fence energiser | Electrical Machinery Regulations 1 | “electric fence energiser” means electrical machinery arranged so as to deliver a periodic non-lethal amount of electrical energy to an electric fence connected to it; |
| – | electric fence system | Electrical Machinery Regulations 1 | “electric fence system” means an electric fence and an electric fence energiser; |
| – | electrical contractor | Electrical Installation Regulations 1 | “electrical contractor” means a person who undertakes to perform electrical installation work on behalf of any other person, but excludes an employee of such first-mentioned person; |
| – | electrical installation | General Machinery Regulations 1 | “electrical installation” means any electrical installation as defined in regulation 1 of the Electrical Installation Regulations, published under Government Notice R.2270 of 11 October 1985; |
| – | electrical installation | Electrical Installation Regulations 1 | “electrical installation” means any machinery, in or on any premises, used for the transmission of electricity from a point of control to a point of consumption anywhere on the premises, including any article forming part of such an electrical installation irrespective of whether or not it is part of the electrical circuit, but excluding (a) any machinery of the supplier related to the supply of electricity on the premises; (b) any machinery which transmits electrical energy in communication, control circuits, television or radio circuits (c) an electrical installation on a vehicle, vessel, train or aircraft; and (d) control circuits of 50 V or less between different parts of machinery or system components, forming a unit, that are separately installed and derived from an independent source or an isolating transformer; |
| – | Electrical Installation Regulations, 1992 | Electrical Installation Regulations 1 | “Electrical Installation Regulations, 1992” means the Electrical Installation Regulations, 1992, promulgated by Government Notice No. R.2920 of 23 October 1992; |
| – | electrical tester for single phase | Electrical Installation Regulations 1 | “electrical tester for single phase” means a person who has been registered as an electrical tester for single phase in terms of regulation 11 (2) for the verification and certification of the construction, testing and inspection of electrical installations supplied by a single-phase electricity supply at the point of control, excluding specialised electrical installations; |
| – | electromagnetic field | Physical Agents Regulations 1 | "electromagnetic field" means the static electric, static magnetic and time-varying electric and magnetic fields with frequencies up to 300 GHz; |
| – | elevator | General Machinery Regulations 1 | “elevator” means any lift, hoist or other appliance used for the conveyance of persons and goods by means of a car, cage, cradle or other receptacle in a hatchway on fixed guides, but does not include a builder’s hoist or a hoist worked by hand power; |
| – | emergency plan | Major Hazard Installation Regulations 1 | "emergency plan" means a plan contemplated in regulation 15; |
| – | employee | OHS Act 1(1) | “employee” means, subject to the provisions of subsection (2), any person who is employed by or works for an employer and who receives or is entitled to receive any remuneration or who works under the direction or supervision of an employer or any other person; |
| – | employer | OHS Act 1(1) | “employer” means, subject to the provisions of subsection (2), any person who employs or provides work for any person and remunerates that person or expressly or tacitly undertakes to remunerate him, but excludes a labour broker as defined in section 1(1) of the Labour Relations Act, 1956 (Act No. 28 of 1956); |
| – | employers’ organization | OHS Act 1(1) | “employers’ organization” means an employers’ organization as defined in section 1 of the Labour Relations Act, 1956 (Act No.28 of 1956); Definition of “ employers’ organisation”inserted by s. of Act No. 181 of 1993. |
| – | employment | OHS Act 1(1) | “employment” or “employed” means employment or employed as an employee; |
| – | Engineering Profession Act, 2000 | Electrical Installation Regulations 1 | “Engineering Profession Act, 2000” means the Engineering Profession Act, 2000 (Act No. 46 of 2000); |
| – | environmental air monitoring | Asbestos Abatement Regulations 1 | “environmental air monitoring” includes static air monitoring for regulated fibres conducted downwind from outdoor type 2 asbestos work or outside asbestos enclosures where type 3 asbestos work is performed or in any area where there is the potential for asbestos contamination; |
| – | equivalent chill temperature | Physical Agents Regulations 1 | "equivalent chill temperature" means the expression of wind-chill reflecting the cooling power of wind on exposed flesh, which takes into account both dry-bulb temperature and wind speed; |
| – | equivalent sound pressure level | Environmental Regulations for Workplaces 1 | “equivalent sound pressure level” is the value of the equivalent continuous sound level which would deliver the same amount of sound energy as the actual fluctuating sound, measured over the same time period, and ‘equivalent noise level’ has a corresponding meaning; Defination of “equivalent noise level”substitute defination of “ equivalent sound pressure level by GNR.489 of 18 March 1994. |
| – | ergonomic risk | Ergonomics Regulations 1 | “ergonomic risk” means a characteristic or action in the workplace, workplace conditions or a combination thereof that may impair overall system performance and human well-being; |
| – | ergonomic risk assessment | Ergonomics Regulations 1 | “ergonomic risk assessment” means a programme, process or investigation to identify, analyse, evaluate and prioritise any risk from exposure to ergonomic risks associated with the workplace; |
| – | ergonomics | Ergonomics Regulations 1 | “ergonomics” means the scientific discipline concerned with the fundamental understanding of interactions among humans and other elements of a system and the profession that applies theory, principles, data and methods to design in order to optimise human well-being and overall system performance; |
| – | escalator | General Machinery Regulations 1 | “escalator” means any power-driven inclined continuous stairway with moving steps and hand rails which is intended for the conveyance of persons from one level to another; |